Unbrick LG G4 H810 Brick hs-usb Qdloader 9008 Without Box 100% Tested Without Password

Unbrick LG G4 Brick hs-usb Qdloader 9008

Credit Goes To

GSM-SOURCES-BD

Engineer

Md,Sabbir Hossain

H810 Fix By QFIL File

QPST TOOL

Qdload9008_HSUSB_DRIVER {32/64bit}

Run Setup.exe

Windows {Start} button >> Allprograms >> QPST >> QFIL

installation confirmation

Dloader download mode,connect the FORCED_USB emmc section with a jumper or pressing key combination (volup + voldown) and power to boot Emergency D/L mode

After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered amd connected to QFIL

In Emergency D/L mode,check the point in device manager after connecting USB -> QS

Windows {Start} button >> Allprograms >> QPST >>Run QFIL

Select Port

1.Click the "Select Port" button

If you deselect Show Non Diagnostic Port,Only the "Diagnostic" or "Qdloader" port will be visible

Selecting the port identified by Device Manager

MBN file selection

2.Click the "Browse" button

Select the file "prog_emmc_firehose_8992_lite.mbn" in the folder where the images are stored for Fusing samples,use images made for fusing.

ForFusingDevice: For Fusing Devices -> Download to LAF after recovery

NotForFusingDevice: For non-fused devices -> Restore and download

Select Build, RawProgram, Path Check

Check RawProgram and Patch settings

Check the rawprogram0.xml patch0.xml file included

in the -select Build patch.

firehoseprogrammer MBN selected in the same folder

Rawprogram0.xml, patch0.xml are loaded.

SWDownload

4.Click the "Download" button

-The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed.